Author Topic: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH  (Read 1891 times)

0 Members and 1 Guest are viewing this topic.

Offline Jamie Long

  • Moderator
  • Full Member
  • *****
  • Posts: 1063
  • Country: 00
    • Fuel Moto USA
Fuel Moto has partnered with D&D to offer the E-Zilla, the ultimate tunable 2/1 system for high output FLH applications. The Fuel Moto E-Zilla 2/1 system is based on the D&D Boarzilla header pipe along with our Fuel Moto E-Series muffler which features our elliptical disc tuning system. Our evolutionary disc system allows tuners & enthusiasts alike full tunability to give the motor what it wants/needs, as well as the ability to acheive the sound level they desire. Tuning discs are easily added or removed in minutes and user adjustabily is better than any other system on the market. The E-Series muffler allows for superior horsepower & torque, along with a much more reasonable dB level compared to a straight thru core. The E-Zilla pipe uses large stepped 1.875" to 2.00" primaries and this system is designed specifically for motors making 135-180Hp. For more info you can visit http://www.fuelmotousa.com/i-22100567

Features large stepped 1.875" to 2.00" primaries
Ceramic coated header
Dual 12mm & 18mm bungs (plugs included)
Includes 15 pre-installed E-Series tuning discs
Supports 135-180Hp
Fits 1999-2015 FLH models (1999-2008 requires trans mount)




Offline joe_lyons

  • Administrator
  • Full Member
  • *****
  • Posts: 4986
  • Country: us
  • Just another squirrel trying to get a nut.
    • Powerhouse Cycle & Dyno
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #1 on: July 01, 2015, 10:21:22 PM »
Looks good Jamie.  If I only had a touring bike.
Powerhouse Cycle & Dyno - Performance is our passion
816-425-4901

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 15427
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #2 on: July 02, 2015, 02:47:33 AM »
Sounds like a good combination. I like my Zilla, but at times, it is a bit loud.
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 15427
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #3 on: July 02, 2015, 03:05:53 AM »
Jamie, I guess a man could just buy the E series muffler for this system if he has a Zilla now? Is the muffler a 2-1/2" inlet? 
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Jamie Long

  • Moderator
  • Full Member
  • *****
  • Posts: 1063
  • Country: 00
    • Fuel Moto USA
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #4 on: July 02, 2015, 07:01:54 AM »
Jamie, I guess a man could just buy the E series muffler for this system if he has a Zilla now? Is the muffler a 2-1/2" inlet?

Yes we now offer an E-Series retrofittable 2/1 muffler kit for looking to put a tunable E-Series muffler on their current 2/1 system. We offer the muffler $349.00, heat shield $129.00, and stainless inlet extension (if necessary) $35.00. If you are mounting on the D&D Fatcat or Boarzilla you will need all three components, if you are mounting on a V&H Pro Pipe you can use just the muffler as the stock heat shield will work. Adding the E-Series gives you full tunability and definitely allows you to tame the exhaust note compared to a straight thru core, another benefit is reduced reversion & better O2 sampling. 

Offline Ohio HD

  • Professional Cat Herder
  • Administrator
  • Full Member
  • *****
  • Posts: 15427
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #5 on: July 02, 2015, 03:50:44 PM »
Jamie, I guess a man could just buy the E series muffler for this system if he has a Zilla now? Is the muffler a 2-1/2" inlet?

Yes we now offer an E-Series retrofittable 2/1 muffler kit for looking to put a tunable E-Series muffler on their current 2/1 system. We offer the muffler $349.00, heat shield $129.00, and stainless inlet extension (if necessary) $35.00. If you are mounting on the D&D Fatcat or Boarzilla you will need all three components, if you are mounting on a V&H Pro Pipe you can use just the muffler as the stock heat shield will work. Adding the E-Series gives you full tunability and definitely allows you to tame the exhaust note compared to a straight thru core, another benefit is reduced reversion & better O2 sampling.

Thanks Jamie, that may be added to a dew small changes I want to make with the 117" I have. That E series muffler, and a cam change will work well together I think. I Should be able to add some earlier torque, and keep the HP I have.
For the best deal on bike parts, call Calif Phil
     www.harleypartscheap.com

Offline Jonny Cash

  • Site Supporter
  • Full Member
  • *****
  • Posts: 343
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #6 on: July 03, 2015, 01:30:23 PM »
available in black?
Accurate information is expensive, rare and difficult to find!

Offline Jamie Long

  • Moderator
  • Full Member
  • *****
  • Posts: 1063
  • Country: 00
    • Fuel Moto USA
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #7 on: July 06, 2015, 11:40:04 AM »

Offline DOM

  • Full Member
  • Posts: 364
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #8 on: July 06, 2015, 04:05:05 PM »
Jamie, What kind of performance improvement would you expect over the quiet fatcat muffler?  What do these sound like compared to the Fatcat?

Offline remington007

  • Full Member
  • Posts: 432
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #9 on: July 09, 2015, 02:45:41 PM »
Jamie, is the retro-fit muffler made for the newest Pro Pipe Chrome?  Have you tested results with that pipe verses the D&D?

Offline Jamie Long

  • Moderator
  • Full Member
  • *****
  • Posts: 1063
  • Country: 00
    • Fuel Moto USA
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #10 on: July 10, 2015, 07:27:08 AM »
Jamie, What kind of performance improvement would you expect over the quiet fatcat muffler?  What do these sound like compared to the Fatcat?

The gains are relative to the specific combination and what the motor wants tuning wise, the E-Series has a nice deep tone and this design removes the sharp hammering effect associated with some straight thru cores on many combinations.

Offline Jamie Long

  • Moderator
  • Full Member
  • *****
  • Posts: 1063
  • Country: 00
    • Fuel Moto USA
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #11 on: July 10, 2015, 07:33:15 AM »
Jamie, is the retro-fit muffler made for the newest Pro Pipe Chrome?  Have you tested results with that pipe verses the D&D?


We offer the E-Series universal 2/1 muffler kit which fits the V&H Pro Pipe. On the FLH it is a direct fit and even uses all of the V&H shields. The Pro Pipe has a really nice header (comparable to D&D) but the V&H baffle leaved something to be desired. Overall performance between the Pro Pipe and D&D Fatcat both fitted with the E-Series muffler is pretty much identical on most combinations. 

Here is a link to the E-Series 2/1 retrofit muffler kit http://www.fuelmotousa.com/i-22164513 

Offline Jasper

  • Full Member
  • Posts: 86
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #12 on: July 04, 2017, 09:57:23 AM »
Jaime - are these still available? (doesnt seem like it on your site) -- would love to find an alternative for my 98 FLH (124")

Offline Lone Ranger

  • Member
  • Posts: 44
  • Country: us
Re: New Fuel Moto E-Zilla tunable hi output 2/1 exhaust for FLH
« Reply #13 on: August 10, 2017, 09:47:23 AM »
Jamie, is the retro-fit muffler made for the newest Pro Pipe Chrome?  Have you tested results with that pipe verses the D&D?


We offer the E-Series universal 2/1 muffler kit which fits the V&H Pro Pipe. On the FLH it is a direct fit and even uses all of the V&H shields. The Pro Pipe has a really nice header (comparable to D&D) but the V&H baffle leaved something to be desired. Overall performance between the Pro Pipe and D&D Fatcat both fitted with the E-Series muffler is pretty much identical on most combinations. 

Here is a link to the E-Series 2/1 retrofit muffler kit http://www.fuelmotousa.com/i-22164513


Would the E-Series universal 2/1 muffler kit also fit a Bassani B4 pipe?