Author Topic: Touring/Bagger V-Rod  (Read 358 times)

0 Members and 1 Guest are viewing this topic.

Offline electrajohnt

  • Member
  • Posts: 15
  • Country: gb
Touring/Bagger V-Rod
« on: March 19, 2017, 04:07:07 PM »
Getting old, feeling the weight/height or fear of the weight of roadglide CVO Ultra.

I don't really need full Touring spec but would like roadglide style front end, rear bags and decent seat for the missus.

Is it practical with a V Rod, who sells the parts to do it.

Any guidance or thoughts appreciated.
JohnT

Offline rbabos

  • Full Member
  • Posts: 12045
  • Country: ca
Re: Touring/Bagger V-Rod
« Reply #1 on: March 20, 2017, 07:26:58 AM »
Getting old, feeling the weight/height or fear of the weight of roadglide CVO Ultra.

I don't really need full Touring spec but would like roadglide style front end, rear bags and decent seat for the missus.

Is it practical with a V Rod, who sells the parts to do it.

Any guidance or thoughts appreciated.
JohnT
Too much money and work to convert.  I'd be looking at other brands for your goals.
Ron

Offline PC_Hater

  • Full Member
  • Posts: 1683
  • Country: england
Re: Touring/Bagger V-Rod
« Reply #2 on: March 21, 2017, 04:50:04 AM »
http://www.grcustoms.com and possibly others sell the kit to mount the Road Glide fairing you already have to the V-Rod you have to buy!

My Plan A would be to remove all the unnecessary junk from the CVO Road Glide you already have.
The radio goes, the Tour Pak goes (have you seen how much they weigh?), fit lighter wheels, perhaps a different seat etc.
Fit an anti-gravity battery, expensive but you lose 18lbs in weight.
Sumax fibreglass mudguards will get yet more weight off.
etc etc.
The footboard mounts are big heavy lumps of steel, they could be replaced with something nice and lighter. (please order two sets if you find any, I want them too!)

I use a Givi topbox and an Electraglide seat with the rider section cut-down to be about the same as the original Road Glide seat. That way she still has the very comfy passenger seat.
The radio is gone, the speakers are gone, the front wheel and tyre is 13lbs lighter using a now unobtainable Dymag wheel.
I would be using nice light 17" wheels if I were doing it now.
1942 WLA45 chop, 1999 FLTR(not I), 2000 1200S

Offline Hal64hd

  • Full Member
  • Posts: 117
Re: Touring/Bagger V-Rod
« Reply #3 on: March 22, 2017, 01:18:25 PM »

Offline electrajohnt

  • Member
  • Posts: 15
  • Country: gb
Re: Touring/Bagger V-Rod
« Reply #4 on: March 22, 2017, 03:36:01 PM »
Everone, thank you for the input.

Offline Panzer

  • Shed Master
  • Site Supporter
  • Full Member
  • *****
  • Posts: 10458
  • Country: us
  • A Smith & Wesson beats 4 aces
Re: Touring/Bagger V-Rod
« Reply #5 on: March 22, 2017, 06:45:50 PM »
HAL64HD........your PM box is full.
DIFFERENCE OF IN-LAWS AND OUTLAWS?  OUTLAWS ARE WANTED

Offline Hal64hd

  • Full Member
  • Posts: 117
Re: Touring/Bagger V-Rod
« Reply #6 on: April 02, 2017, 11:30:26 AM »
Oops my bad,
  Cleared a few out ty