Recent Posts

Pages: [1] 2 3 ... 10
1
Twin Cam / Re: 2007 Street Glide fuel filter change
« Last post by Prostock on Today at 02:57:55 PM »
Highly recommend replacing high pressure lines and regulator plastic housing.  02-07 is bad years for them getting brittle and break leaving you stranded.
2
Dyno Runs / Re: 2014, 103", FLHR, S&S 625, 58 se,
« Last post by MCE on Today at 02:47:24 PM »
Just found out this bike was tuned in Reno, Nevada at 5,000 ft above sea level.  probably going to run better at sea level.
Or, re-tuned at sea level?
3
Dyno Runs / Re: 2014, 103", FLHR, S&S 625, 58 se,
« Last post by MCE on Today at 02:43:45 PM »
They should have tuned that dip out

What changes in timing and fuel did it need to remove the dip?

Smarty could tell you how to do that. Basically, you tweak the timing and fuel up and down (back and fourth).
He explained it to me once, but my eyes glazed over.  :hyst:

(Allot of that dip could have been fixed by someone that knew wtf they were doing)
This is a joke, right??

No joke. I've seen the before and after on more than a few tunes that had that huge dip
before they worked on it, and it was substantially improved and some cases eliminated after
they did their thing.

I'm Not saying ALL TQ dips can be eliminated or totally fixed by a tune, (b/c most of them
are a result of mismatched components) but I have seen remarkable improvements made
that I wouldn't have thought were possible.

Maybe one of the tuning gurus here can add their wisdom.
4
General / Re: Rubbing sound from front tire??
« Last post by Jammer53 on Today at 02:32:49 PM »
So it doesn't change with the brake or riding on painted lines?

Sorry Hoss. I only noticed the noise at higher speeds on the highway.  I didn't really pay any attention re: painted lines.  Didn't notice it all all in the city.  Rained most of today.  Thursday is scheduled for sun and 80*. So that is the soonest I'll be able to get her out.  I try to avoid foul weather as much as possible.
5
Twin Cam / Re: 2007 Street Glide fuel filter change
« Last post by les on Today at 02:31:52 PM »
Thank you.  That will be helpful.
6
EVO 1340 / Re: Brakes. Replace/rebuild/update?
« Last post by Deye76 on Today at 02:13:17 PM »
Agree with Moose,
 if you want a better feel at the pedal/lever install braided steel lines.
7
SOOOOO....

Rhetoric aside, what's the latest on this big bore business? Been almost 3 mo's now, and your public awaits.


Here's the latest on our end http://www.harleytechtalk.com/index.php?topic=97940.0
8
Twin Cam / Re: 06 Dyna 6 speed main bearings
« Last post by VDeuce on Today at 02:07:55 PM »
I believe the original bearing bas been superceded so the single row bearing is the new replacement. No idea how it will perform.

FSGs thread
http://www.harleytechtalk.com/index.php?topic=97746.0
9
SOOOOO....

Rhetoric aside, what's the latest on this big bore business? Been almost 3 mo's now, and your public awaits.
10
Milwaukee-Eight / Re: SCREAMIN' EAGLE MILWAUKEE-EIGHT CLUTCH KIT
« Last post by SLAATY on Today at 01:55:02 PM »
"All the young dudes
Carry the news
Boogaloo dudes
Carry the news"

Sorry. Couldn't hep m'sef...
Pages: [1] 2 3 ... 10